EcoPrint

A white, opaque polyurethane material with a matte finish. Thin and elastic, suitable for letterings, logos, or small images. Designed for printing with solvent or eco-solvent printers and can be used with latex printers.

Please be aware that this printable has a slightly sticky carrier and it needs HFIX-FLCK to remove the print from the backing. We recommend that you take the backing from the transfer mask, not taking the film from the backing.

No nylon. Test on dazzle cloth and shiny polyester. Please make sure that the material is free from dust and debris before printing by wiping with a dry cloth. After pressing, we recommend that you wait 24 hours before washing.

Application instructions for moisture-wicking materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow better adhesion to the garment.

Application instructions for dazzle cloth & shiny polyester materials:
We highly recommend you TEST prior to doing large runs. Coated polyester can routinely cause adhesion issues.